Our warping tools include:

Heddle Hooks are available in two blade lengths -- 4 1/2" and 7 1/2"

Reed Hook 
Our brass S-shaped reed hook is designed to fit comfortably in your hand. The large hook makes the sleying of various size yarns easy.

Warping Paddles
can save you time when measuring many warp threads. Our paddle makes it possible to measure up to 20 threads at a time. The slot-and-eye design alleviates the need to hand pick the cross. The square handle makes it easy to clamp our warping paddle to a shelf or table.

Warping Pegs 
Warping Pegs are the simplest and most portable warp-measuring tools.  They clamp to a table or counter; the single peg placed at one end of the warp length and the pair of pegs placed at the other end, spread as far apart as the warp is long.  Use with your own "C" clamps.
 

Auto Reed Hook 
The Auto Reed Hook is a sley hook that advances automatically across the reed, moving from one dent to the next without being removed and reinserted.

Warping Boards 
Warping Boards are the most commonly used measuring devices. Our warping boards are available in two sizes:  the 14 yard warping board is one yard across and the 4 1/2 yard warping board measures a half yard across. To withstand the strain of threads under tension, we tenon our hardwood dowels and press them securely into the frame.

                    
4 1/2 Yard Warping Board                                            14 Yard Warping Board
 

Suggested Retail Prices and Dimensions Subject to change without notice
WARPING BOARDS
WW7101	14 Yard Warping Board	$ 105.00
WW7102	4 1/2 Yard Warping Board	68.00
Warping Board 14 yd	39" x 31" x 6"	7 lb
Warping Board 4 1/2 yd	20" x 20" x 6"	3 1/2 lb

Warping Mills
are ideal for long warps. Instead of going back and forth with your arm to measure threads like on a warping board, the warping mill goes around and around which is quicker and less tiring. Our warping mills come in two models: the vertical warping mill sits on a table, and our horizontal warping mill which may be used either on a table or on the floor. Both mills have a two yard circumference, will hold up to 18 yards of warp, and can be folded up for storage.

           
Horizontal Warping Mill               Vertical Warping Mill
 

Suggested Retail Prices and Dimensions Subject to change without notice
WARPING MILLS
WW7001	Vertical Warping Mill	$ 315.00
WW7002	Horizontal Warping Mill	337.00
Vertical Warping Mill	25" x 36" x 25"	14 lb
Horizontal Warping Mill	36" x 34" x 25"	18 lb

Spool Rack 
Our spool rack is essential for sectional warping.  Ours will hold up to forty 4" spools and has a center post that pivots for easy loading and unloading.  The center post locks into place during use.  Even though the spool rack is generally used for sectional warping.  It can be indispensable for other studio tasks as well: holding standard yarn tubes and bobbins or as a place to clamp a swift or ball winder.  Our spools are made of cardboard and measure 4" wide with 3" flanges.
 

Tension Box  
Our Tension Box features a mounting bracket that adjusts to fit all our looms: Wolf, Standard, or Cranbrook.  It should be compatible with floor looms other than ours, as well.  Features include: two-sided sturdy construction with a reed at the back, an adjustable tension knob, a heddle to make the cross, and a swiveling reed at the front to adjust the feeding width of the warp.

Sectional Warp Beams
are available for our: Wolf looms, Standard floor looms, and Cranbrook looms. Our sectional beams are easily assembled and can be installed on the existing warp beam of your Schacht loom at any time.  Sectional beams for Standard floor looms have 2" sections and a one half yard circumference; Baby Wolf and Mighty Wolf sectional beams have 2" sections and a one foot circumference. They are available in maple or cherry with maple pegs. 

Yardage Counters
are useful tools for those who warp sectionally.  As opposed to most counters which read in feet, ours records yards (you can also request a meter counter).  The counter will record up to 9999 yards and comes complete with a clamp.

Raddles
help keep a warp spread evenly as it is wound onto the warp beam.  Ours have built-in clamps and can be attached to either the loom's back beam or the shuttle race of the beater.  The raddles come with plated pins inserted every inch and with holes drilled every half inch with enough extra pins included should you prefer half-inch spacing.  Our Wolf Pup, Baby Wolf and Mighty Wolf  Raddles come with special mounting brackets for the Wolf loom diagonal beams, as well as clamps for square beams or shuttle races.