Sampling Ideas

Sampling Ideas

By Jane Patrick

I’ve been weaving since 1971. If my math is correct (always a question), it means I’ve been at it for some 36 years (some years more than others). Over that length of time, you learn a few things. And keep learning—and this is what I love about weaving.

Just a week ago as I was working on some samples for my class at Eastern Great Lakes Fiber Conference (October 5-8), I discovered quite by accident—great discoveries often happen this way, not to presume that I’ve made an amazing innovation, something that I’ll use henceforth.

I’ve made much jaw music about sampling. Bottom line: you sample to gain information. Eight inches is a good width for a sample, because it lets you know enough about how the fabric is going to behave in a larger piece than a narrower sample will tell you. I was warping with Harrisville Shetland 2-ply but ran out of the color before I’d achieved my 8” worth of sample width. To finish out what I needed, I used two other dibby-dabs of leftover yarn. What I discovered in the weaving was that these colors gave me more information about how the weft interacted with the warp.

3 samples from one warp

Here are some of the samples from that warp. For easy reference, I’m storing them in clear plastic three-ring binder sleeves so that both the front and the back can be viewed. (Sometimes the “back” side is more what you have in mind than the “front” side.) Opposite the swatch is a page with the warp and weft information, draft (for harness looms) and threading guide for (rigid heddle looms), as well as my weaving record for that particular sample.

Keeping good records is critical. Even though you may think you will, you will NOT remember what you did. (I continue to learn this over, and over, and over.)

← Older Post Newer Post →

© Schacht Spindle Company